Snagging is the systematic inspection of a newly built property before or at handover, in which the buyer or their appointed inspector records every defect, unfinished item or installation fault that needs correcting. To snag a property in Dubai means walking through each room, noting issues such as cracked tiles, paint marks, faulty fittings or misaligned doors, and submitting a formal snag list to the developer. The list is the buyer's written record of what was wrong at handover, and repairs are normally completed before the keys are accepted.
Why Snagging Matters at Handover
Handover is the point where the developer hands physical possession of a unit to the buyer. Once you accept keys and sign handover documents, the conversation about defects becomes harder, because the developer can argue that the property was delivered in acceptable condition. A thorough snag list creates a dated record that protects you while the work is still the developer's responsibility.
Snagging also keeps the project honest about its timeline. Many newly completed units have small outstanding items, such as unfinished silicone, missing door stoppers or incomplete cabinetry. Left unrecorded, these become your cost to fix later. Recorded properly, they become part of the developer's handover obligations.
The stakes are higher when a unit is bought off plan and the buyer has not seen the finished interior before. Photographs in a brochure rarely reveal a poorly sealed bathroom or a balcony drain that does not run. Snagging is the first real test of what was actually built.
What a Snagging Inspection Covers
A complete snagging inspection looks at both the finish and the function of a unit. Finish issues are the visible imperfections, while function issues are the systems that must work every day. A good inspector checks both, and does so with the lights on, taps running and doors opened and closed.
Most inspections cover the following areas:
- Walls and ceilings: cracks, uneven plaster, paint runs, scuffs and visible patching.
- Flooring and tiling: hollow or loose tiles, chips, uneven grout lines and lippage between adjacent tiles.
- Doors and windows: alignment, locks, hinges, seals, glazing and smooth opening or closing.
- Kitchen and bathroom: cabinet fit, countertop joins, sanitaryware, taps, extractor fans and silicone sealing.
- Electrical: sockets, switches, light fittings, circuit labelling and the consumer unit.
- Plumbing and drainage: water pressure, hot water, leaks under sinks, drain flow and toilet cisterns.
- Air conditioning and ventilation: whether units run, vents are installed, and condensate lines drain properly.
- Balconies, terraces and external areas: drainage outlets, railings, balustrades and waterproofing signs.
- Common-area interfaces: entrance doors, corridor finishes and access points that connect to the building.
Each defect should be photographed, numbered, located precisely and described in plain language. Vague notes such as "bathroom issue" are difficult to enforce. "Shower tray cracked at north corner, 20 cm from wall" leaves little room for dispute.
How the Snagging Process Works in Dubai
The exact procedure depends on the developer, the building and the terms of your sale and purchase agreement. Developers in Dubai Hills Estate generally follow a structured handover, but the details, notice periods and defect timelines should always be confirmed in writing. The steps below describe a typical sequence rather than a binding process.
- Request the handover date and inspection window. Ask the developer for the scheduled handover and whether a pre-handover inspection slot is available.
- Arrange an inspection before accepting keys. You can bring a qualified inspector or go yourself with a checklist, a torch, a tape measure and a camera.
- Walk the unit systematically. Work room by room, test every fitting, and open every cupboard. Take photographs as you go.
- Prepare a written snag list. Group items by room and category, mark urgent defects, and attach photographs with reference numbers.
- Submit the list and obtain a receipt. Send it through the developer's official channel and keep proof of delivery.
- Agree a rectification timeline. Ask for a date for each category of repair, and note which items may need a re-inspection.
- Re-inspect after repairs. Check that each item is closed out properly, and record anything still open before signing final documentation.
Buyers sometimes feel pressure to accept keys quickly, especially when a move date is fixed. It is still worth taking the time to complete the list. A short delay for a proper inspection is far cheaper than repairing a leak that was visible on day one.
Snagging versus a defects liability period
Snagging and the defects liability period are related but different. Snagging is the inspection that happens around handover and records what is visibly wrong at that moment. A defects liability period is a later window during which the developer or contractor may be responsible for repairing faults that appear after completion. Whether such a period applies, how long it runs and what it covers should be checked in your contract. Confirm current requirements with the developer, a licensed advisor or official Dubai Land Department channels, as rules and contract terms can change.
Common Defects Found During Snagging
Most snag lists in new-build apartments and villas share a familiar set of problems. Knowing them in advance helps you check the right things and avoid missing faults that only appear after a few weeks of use.
Cosmetic defects
Cosmetic issues are the easiest to spot and the most common. Paint that has not been cut in neatly around skirting, scratches on glass, dust trapped inside light fittings and uneven joints in cabinetry all fall into this category. They rarely affect how the home works, but they shape your first impression and should still be logged.
Functional defects
Functional defects matter more because they affect daily life. Look for taps that drip, toilets that run on, sockets that do not work, air conditioning outlets that have not been connected, and water pressure that drops when two fixtures are running at once. Test each one, and note the result even if it appears to work.
Water and waterproofing
Water-related defects are the most important to catch at handover. Check the seal around the bath and shower, the base of toilets, the edges of balcony tiling and the drainage outlets on terraces. Stains on ceilings below wet areas, or a hollow sound under tiles in bathrooms, should be recorded and raised clearly.
Snagging When You Are Selling a Distressed Property
Snagging is not only a buyer's exercise. Owners who need to sell a unit quickly, for example because of a financial pressure or a change in circumstances, often find that a few well-chosen repairs can make a meaningful difference to how a property is received. Buyers and their advisors read a snag-free unit as a well-maintained one, which supports confidence and reduces the number of renegotiation points during a sale.
Equally, a seller who understands the snag process can avoid unnecessary spending. Not every cosmetic mark needs fixing before a sale. Focus first on items that affect safety, water, electrics and access, then on anything that a buyer would certainly raise in a survey. If you are considering a sale and want a clearer picture of the process

